5+ 自転車スタンド自作木製 For You

1088円で自転車スタンドを作ってみました。 BMX RIDER'S HIGH from b-m-x.site

Introduction

Cycling is a great way to stay fit and healthy while also reducing your carbon footprint. However, storing your bike can be a challenge, especially if you live in a small apartment or have limited space. A bike stand is an essential accessory for any cyclist, but buying one can be expensive. In this article, we will show you how to make your own wooden bike stand at home.

Materials Required

Before you start building your bike stand, you will need the following materials:

4 pieces of 2x4 lumber (8 feet long)
2 pieces of 2x6 lumber (3 feet long)
2 pieces of 2x6 lumber (1 foot long)
16 wood screws (3 inches long)
Wood glue
Wood stain (optional)

Step-by-Step Instructions

Follow these simple steps to build your own wooden bike stand:

Step 1: Cut the Lumber

Using a saw, cut the 2x4 lumber into four 3-foot pieces and four 1-foot pieces. Cut the 2x6 lumber into two 3-foot pieces and two 1-foot pieces.

Step 2: Assemble the Base

Take two of the 3-foot 2x4 pieces and two of the 1-foot 2x4 pieces. Use wood glue and screws to attach them together to form a rectangular base.

Step 3: Attach the Legs

Attach the remaining 3-foot 2x4 pieces to the corners of the base using wood glue and screws. These will be the legs of the stand.

Step 4: Add Support Beams

Take the two 3-foot 2x6 pieces and attach them to the legs using wood glue and screws. These will provide additional support for the stand.

Step 5: Attach the Top Beam

Take the two 1-foot 2x6 pieces and attach them to the top of the legs using wood glue and screws. These will support the top beam.

Step 6: Attach the Top Beam

Take the remaining 1-foot 2x4 pieces and attach them to the top of the legs using wood glue and screws. These will hold the bike in place.

Step 7: Sand and Stain

Sand the stand to remove any rough edges and apply wood stain if desired.

Tips for Using Your Wooden Bike Stand

Here are some tips to help you get the most out of your wooden bike stand:

Make sure the stand is placed on a level surface.
Position the bike so that the top tube rests on the 1-foot 2x4 pieces.
Use a bungee cord to secure the bike to the stand and prevent it from falling over.
Store the bike stand in a dry place to prevent the wood from warping or rotting.

Conclusion

Building your own wooden bike stand can be a fun and rewarding project that will save you money and provide a sturdy and reliable way to store your bike. With just a few basic tools and some lumber, you can create a custom stand that fits your bike perfectly. So why not give it a try and see how easy it is to DIY your own bike stand?

5+ 自転車スタンド自作木製 For You

Introduction

Materials Required