List Of タント自転車積み方 References

Introduction

If you own a Tanto bicycle, you know how convenient it can be for commuting or running errands. However, there might be times when you need to transport it in a car or store it in a tight space. In this article, we will provide you with some tips on how to load your Tanto bicycle safely and efficiently.

Step 1: Remove the Front Wheel

The first step in loading your Tanto bicycle is to remove the front wheel. This will make it easier to fit the bike in a car trunk or store it in a small space. To remove the wheel, lift the bike and rest it on the handlebars and seat. Then, release the brake and unscrew the quick-release lever on the front wheel. Gently pull the wheel out of the fork and set it aside.

Step 2: Fold the Handlebars

Next, you will need to fold the handlebars of your Tanto bicycle. This will reduce the width of the bike and make it easier to fit in a car trunk or store it in a tight space. To fold the handlebars, loosen the stem bolt with a wrench and rotate the handlebars to the side. Then, tighten the bolt to secure the handlebars in place.

Step 3: Lower the Saddle

The saddle of your Tanto bicycle can be lowered to create more space and make it easier to load the bike. To lower the saddle, loosen the seat post clamp and slide the saddle down to the desired height. Then, tighten the clamp to secure the saddle in place.

Step 4: Position the Bike

Once you have removed the front wheel, folded the handlebars, and lowered the saddle, you can position the bike for loading. Place the bike in the trunk of your car or against a wall if you are storing it. Make sure the bike is stable and won't fall over.

Step 5: Secure the Bike

To prevent your Tanto bicycle from moving around during transport or storage, you should secure it with straps or bungee cords. Attach the straps or cords to the frame of the bike and anchor them to the car's tie-downs or a sturdy wall anchor. Make sure the bike is tightly secured and won't shift during transport or storage.

Step 6: Reattach the Front Wheel

After you have transported or stored your Tanto bicycle, you will need to reattach the front wheel. To do this, slide the wheel back into the fork and tighten the quick-release lever. Make sure the wheel is centered and the brake is working properly before riding the bike.

Conclusion

Loading a Tanto bicycle can be a simple and straightforward process if you follow these tips. By removing the front wheel, folding the handlebars, lowering the saddle, positioning the bike, securing it with straps or cords, and reattaching the front wheel, you can transport or store your Tanto bicycle safely and efficiently.