リアディレイラー調整 自転車 通販 Amazon.co.jp from www.amazon.co.jp
Introduction
If you're an avid cyclist, you know how important it is to have your bike gears functioning properly. Adjusting your bike gears can be a daunting task, but it's a skill that every cyclist should have. In this article, we'll provide you with a comprehensive guide on how to adjust your bike gears.
Why Adjusting Your Bike Gears is Important
Having your bike gears properly adjusted ensures that you can ride smoothly and efficiently. A poorly adjusted gear can cause your chain to slip or make it difficult to change gears, which can make for an uncomfortable and frustrating ride.
Tools You'll Need
Before we begin, it's important to have the right tools on hand. You'll need a set of Allen keys, a screwdriver, and possibly a chain whip and cassette lockring tool depending on the type of gears you have.
Step 1: Set the Limit Screws
The first step in adjusting your bike gears is to set the limit screws. These screws determine how far your derailleur can move in either direction. To adjust the limit screws, use your Allen key to turn the screws until the derailleur is aligned with the smallest and largest gears on your bike.
Step 2: Adjust the Cable Tension
Next, you'll need to adjust the cable tension. This controls how tightly the cable is pulling on the derailleur. To adjust the cable tension, use your Allen key to loosen the bolt that holds the cable in place, then pull the cable tighter and tighten the bolt again.
Step 3: Test the Gears
Once you've adjusted the limit screws and cable tension, it's time to test your gears. Shift through all of your gears to make sure they're shifting smoothly and accurately. If you notice any problems, go back and adjust the limit screws or cable tension as needed.
Step 4: Adjust the B-Limit Screw (if applicable)
If you have a rear derailleur with a B-limit screw, you'll need to adjust this as well. The B-limit screw controls how far away the jockey wheel on your rear derailleur is from the largest gear on your bike. To adjust the B-limit screw, use your Allen key to turn the screw until the jockey wheel is aligned with the largest gear.
Step 5: Fine-Tune Your Gears
If your gears still aren't shifting smoothly, you may need to fine-tune them. This involves making small adjustments to the cable tension until your gears are shifting perfectly. It may take some trial and error, but with patience and persistence, you'll get there.
Conclusion
Adjusting your bike gears is an important skill for every cyclist to have. With the right tools and a little bit of know-how, you can keep your bike running smoothly and make every ride a comfortable and enjoyable one. Remember to take your time and be patient, and you'll be a pro at adjusting your bike gears in no time!
0 Response to "7+ 自転車 ギア 調整 リア Ideas"
Posting Komentar