悪用厳禁※】自転車の鍵を “一瞬で開ける” 裏技がこちら YouTube from www.youtube.com
Introduction
Bicycle locks are essential for keeping your bike safe, but what happens when your lock breaks and you can't get it off? In this tutorial, we will show you how to remove a broken bicycle lock with just a minus screwdriver. This technique can save you time and money and get you back on the road in no time.
Step 1: Assess the Damage
The first step in removing a broken bicycle lock is to assess the damage. Look at the lock and determine if the keyhole is still intact. If it is, you may be able to pick the lock with a tension wrench and a pick set. If the keyhole is damaged or the lock is too rusted, then you will need to proceed with the next steps.
Step 2: Gather Your Tools
To remove a broken bicycle lock, you will need a few tools. The most important tool is a minus screwdriver. This type of screwdriver has a flat end with a minus-shaped tip, which is perfect for removing screws with a minus-shaped indentation. You will also need a hammer, pliers, and a metal file.
Step 3: Remove the Screw
Using the minus screwdriver, try to remove the screw that is holding the lock in place. If the screw is rusted or tight, tap the end of the screwdriver gently with a hammer to loosen it. Once the screw is removed, you should be able to remove the lock from the bike.
Step 4: File the Screw
If the screw is damaged or broken, you will need to file it down until it is flush with the bike frame. Use a metal file to grind down the screw until it is smooth. Be careful not to damage the bike frame while filing.
Step 5: Remove the Lock
Once the screw is filed down, use pliers to grip the lock and twist it back and forth until it loosens. Be patient and gentle with the lock, as it may take some time to remove it completely.
Step 6: Clean the Area
After removing the lock, clean the area with a cloth to remove any debris or rust. This will prevent any damage to the bike frame and ensure that the new lock fits securely.
Step 7: Install the New Lock
To install a new lock, simply place it in the same position as the old lock and screw it into place using the same screw. Make sure that the lock is tight and secure before using it.
Step 8: Test the Lock
Before using your bike, test the new lock to make sure that it is working properly. Try to remove the lock with a minus screwdriver to ensure that it is secure.
Step 9: Consider Upgrading Your Lock
If your old lock broke, it may be a good time to upgrade to a more secure lock. Look for locks that are made of heavy-duty materials and have a high-security rating.
Conclusion
Removing a broken bicycle lock can be a frustrating and time-consuming process, but with the right tools and technique, it can be done quickly and easily. By following these steps, you can remove your broken lock and install a new one in no time. Remember to always keep your bike locked and secure to prevent theft.
0 Response to "5+ 自転車 鍵 壊し 方 マイナス ドライバー Ideas"
Posting Komentar