If you are an avid cyclist, you know that your bike's gear shifter cables can become worn and need replacement over time. This is a common issue that can affect your bike's performance and make your rides less enjoyable. Fortunately, replacing these cables is a simple process that can be done at home with a few tools and some basic knowledge.
Step 1: Gather Your Tools
Before you begin, you will need a few tools. These include a set of Allen wrenches, cable cutters, a cable housing cutter, a new set of gear shifter cables, and some cable housing.
Step 2: Remove the Old Cables
Start by shifting your bike into the highest gear. Then, using your Allen wrenches, loosen the cable anchor bolt on the derailleur and remove the old cable. Next, loosen the anchor bolt on the shifter and remove the cable from the housing.
Step 3: Cut the New Cables
Measure and cut the new cables to the same length as the old ones. Use cable cutters to trim the excess cable.
Step 4: Install the New Cables
Thread the new cable through the housing and anchor it to the shifter. Then, thread it through the cable housing and anchor it to the derailleur. Make sure the cable is properly tensioned before tightening the anchor bolts.
Step 5: Cut the Cable Housing
Using a cable housing cutter, trim the excess housing to the correct length. Be sure to leave a little extra to allow for movement.
Step 6: Test Your Gears
Shift through your gears to make sure everything is working properly. If your bike isn't shifting smoothly, you may need to adjust the cable tension.
Conclusion
Replacing your bike's gear shifter cables is a simple process that can improve your bike's performance and make your rides more enjoyable. By following these steps, you can easily replace your cables at home and get back to riding in no time.
0 Response to "5+ 自転車 変速 機 ワイヤー 交換 Article"
Posting Komentar